Haskell Hierarchical Libraries (base package)ContentsIndex
Control.Exception
Portabilitynon-portable
Stabilityexperimental
Maintainerlibraries@haskell.org
Contents
The Exception type
Throwing exceptions
Catching Exceptions
The catch functions
The handle functions
The try functions
The evaluate function
The mapException function
Exception predicates
Dynamic exceptions
Asynchronous Exceptions
Asynchronous exception control
Applying block to an exception handler
Interruptible operations
Assertions
Utilities
Description
This module provides support for raising and catching both built-in and user-defined exceptions.
Synopsis
data Exception
= ArithException ArithException
| ArrayException ArrayException
| AssertionFailed String
| AsyncException AsyncException
| BlockedOnDeadMVar
| BlockedIndefinitely
| NestedAtomically
| Deadlock
| DynException Dynamic
| ErrorCall String
| ExitException ExitCode
| IOException IOException
| NoMethodError String
| NonTermination
| PatternMatchFail String
| RecConError String
| RecSelError String
| RecUpdError String
data IOException
data ArithException
= Overflow
| Underflow
| LossOfPrecision
| DivideByZero
| Denormal
data ArrayException
= IndexOutOfBounds String
| UndefinedElement String
data AsyncException
= StackOverflow
| HeapOverflow
| ThreadKilled
throwIO :: Exception -> IO a
throw :: Exception -> a
ioError :: IOError -> IO a
throwTo :: ThreadId -> Exception -> IO ()
catch :: IO a -> (Exception -> IO a) -> IO a
catchJust :: (Exception -> Maybe b) -> IO a -> (b -> IO a) -> IO a
handle :: (Exception -> IO a) -> IO a -> IO a
handleJust :: (Exception -> Maybe b) -> (b -> IO a) -> IO a -> IO a
try :: IO a -> IO (Either Exception a)
tryJust :: (Exception -> Maybe b) -> IO a -> IO (Either b a)
evaluate :: a -> IO a
mapException :: (Exception -> Exception) -> a -> a
ioErrors :: Exception -> Maybe IOError
arithExceptions :: Exception -> Maybe ArithException
errorCalls :: Exception -> Maybe String
dynExceptions :: Exception -> Maybe Dynamic
assertions :: Exception -> Maybe String
asyncExceptions :: Exception -> Maybe AsyncException
userErrors :: Exception -> Maybe String
throwDyn :: Typeable exception => exception -> b
throwDynTo :: Typeable exception => ThreadId -> exception -> IO ()
catchDyn :: Typeable exception => IO a -> (exception -> IO a) -> IO a
block :: IO a -> IO a
unblock :: IO a -> IO a
assert :: Bool -> a -> a
bracket :: IO a -> (a -> IO b) -> (a -> IO c) -> IO c
bracket_ :: IO a -> IO b -> IO c -> IO c
finally :: IO a -> IO b -> IO a
setUncaughtExceptionHandler :: (Exception -> IO ()) -> IO ()
getUncaughtExceptionHandler :: IO (Exception -> IO ())
The Exception type
data Exception
The type of exceptions. Every kind of system-generated exception has a constructor in the Exception type, and values of other types may be injected into Exception by coercing them to Dynamic (see the section on Dynamic Exceptions: Control.Exception#DynamicExceptions).
Constructors
ArithException ArithExceptionExceptions raised by arithmetic operations. (NOTE: GHC currently does not throw ArithExceptions except for DivideByZero).
ArrayException ArrayExceptionExceptions raised by array-related operations. (NOTE: GHC currently does not throw ArrayExceptions).
AssertionFailed StringThis exception is thrown by the assert operation when the condition fails. The String argument contains the location of the assertion in the source program.
AsyncException AsyncExceptionAsynchronous exceptions (see section on Asynchronous Exceptions: Control.Exception#AsynchronousExceptions).
BlockedOnDeadMVarThe current thread was executing a call to takeMVar that could never return, because there are no other references to this MVar.
BlockedIndefinitelyThe current thread was waiting to retry an atomic memory transaction that could never become possible to complete because there are no other threads referring to any of teh TVars involved.
NestedAtomicallyThe runtime detected an attempt to nest one STM transaction inside another one, presumably due to the use of unsafePeformIO with atomically.
DeadlockThere are no runnable threads, so the program is deadlocked. The Deadlock exception is raised in the main thread only (see also: Control.Concurrent).
DynException DynamicDynamically typed exceptions (see section on Dynamic Exceptions: Control.Exception#DynamicExceptions).
ErrorCall StringThe ErrorCall exception is thrown by error. The String argument of ErrorCall is the string passed to error when it was called.
ExitException ExitCodeThe ExitException exception is thrown by exitWith (and exitFailure). The ExitCode argument is the value passed to exitWith. An unhandled ExitException exception in the main thread will cause the program to be terminated with the given exit code.
IOException IOExceptionThese are the standard IO exceptions generated by Haskell's IO operations. See also System.IO.Error.
NoMethodError StringAn attempt was made to invoke a class method which has no definition in this instance, and there was no default definition given in the class declaration. GHC issues a warning when you compile an instance which has missing methods.
NonTerminationThe current thread is stuck in an infinite loop. This exception may or may not be thrown when the program is non-terminating.
PatternMatchFail StringA pattern matching failure. The String argument should contain a descriptive message including the function name, source file and line number.
RecConError StringAn attempt was made to evaluate a field of a record for which no value was given at construction time. The String argument gives the location of the record construction in the source program.
RecSelError StringA field selection was attempted on a constructor that doesn't have the requested field. This can happen with multi-constructor records when one or more fields are missing from some of the constructors. The String argument gives the location of the record selection in the source program.
RecUpdError StringAn attempt was made to update a field in a record, where the record doesn't have the requested field. This can only occur with multi-constructor records, when one or more fields are missing from some of the constructors. The String argument gives the location of the record update in the source program.
show/hide Instances
data IOException
Exceptions that occur in the IO monad. An IOException records a more specific error type, a descriptive string and maybe the handle that was used when the error was flagged.
show/hide Instances
data ArithException
The type of arithmetic exceptions
Constructors
Overflow
Underflow
LossOfPrecision
DivideByZero
Denormal
show/hide Instances
data ArrayException
Exceptions generated by array operations
Constructors
IndexOutOfBounds StringAn attempt was made to index an array outside its declared bounds.
UndefinedElement StringAn attempt was made to evaluate an element of an array that had not been initialized.
show/hide Instances
data AsyncException
Asynchronous exceptions
Constructors
StackOverflowThe current thread's stack exceeded its limit. Since an exception has been raised, the thread's stack will certainly be below its limit again, but the programmer should take remedial action immediately.
HeapOverflow

The program's heap is reaching its limit, and the program should take action to reduce the amount of live data it has. Notes:

  • It is undefined which thread receives this exception.
  • GHC currently does not throw HeapOverflow exceptions.
ThreadKilledThis exception is raised by another thread calling killThread, or by the system if it needs to terminate the thread for some reason.
show/hide Instances
Throwing exceptions
throwIO :: Exception -> IO a

A variant of throw that can be used within the IO monad.

Although throwIO has a type that is an instance of the type of throw, the two functions are subtly different:

 throw e   `seq` return ()  ===> throw e
 throwIO e `seq` return ()  ===> return ()

The first example will cause the exception e to be raised, whereas the second one won't. In fact, throwIO will only cause an exception to be raised when it is used within the IO monad. The throwIO variant should be used in preference to throw to raise an exception within the IO monad because it guarantees ordering with respect to other IO operations, whereas throw does not.

throw :: Exception -> a
Throw an exception. Exceptions may be thrown from purely functional code, but may only be caught within the IO monad.
ioError :: IOError -> IO a
Raise an IOError in the IO monad.
throwTo :: ThreadId -> Exception -> IO ()

throwTo raises an arbitrary exception in the target thread (GHC only).

throwTo does not return until the exception has been raised in the target thread. The calling thread can thus be certain that the target thread has received the exception. This is a useful property to know when dealing with race conditions: eg. if there are two threads that can kill each other, it is guaranteed that only one of the threads will get to kill the other.

If the target thread is currently making a foreign call, then the exception will not be raised (and hence throwTo will not return) until the call has completed. This is the case regardless of whether the call is inside a block or not.

Catching Exceptions
There are several functions for catching and examining exceptions; all of them may only be used from within the IO monad.
The catch functions
catch
:: IO aThe computation to run
-> (Exception -> IO a)Handler to invoke if an exception is raised
-> IO a

This is the simplest of the exception-catching functions. It takes a single argument, runs it, and if an exception is raised the "handler" is executed, with the value of the exception passed as an argument. Otherwise, the result is returned as normal. For example:

   catch (openFile f ReadMode) 
       (\e -> hPutStr stderr (\"Couldn\'t open \"++f++\": \" ++ show e))

For catching exceptions in pure (non-IO) expressions, see the function evaluate.

Note that due to Haskell's unspecified evaluation order, an expression may return one of several possible exceptions: consider the expression error "urk" + 1 `div` 0. Does catch execute the handler passing ErrorCall "urk", or ArithError DivideByZero?

The answer is "either": catch makes a non-deterministic choice about which exception to catch. If you call it again, you might get a different exception back. This is ok, because catch is an IO computation.

Note that catch catches all types of exceptions, and is generally used for "cleaning up" before passing on the exception using throwIO. It is not good practice to discard the exception and continue, without first checking the type of the exception (it might be a ThreadKilled, for example). In this case it is usually better to use catchJust and select the kinds of exceptions to catch.

Also note that the Prelude also exports a function called catch with a similar type to catch, except that the Prelude version only catches the IO and user families of exceptions (as required by Haskell 98). We recommend either hiding the Prelude version of catch when importing Control.Exception, or importing Control.Exception qualified, to avoid name-clashes.

catchJust
:: (Exception -> Maybe b)Predicate to select exceptions
-> IO aComputation to run
-> (b -> IO a)Handler
-> IO a

The function catchJust is like catch, but it takes an extra argument which is an exception predicate, a function which selects which type of exceptions we're interested in. There are some predefined exception predicates for useful subsets of exceptions: ioErrors, arithExceptions, and so on. For example, to catch just calls to the error function, we could use

   result <- catchJust errorCalls thing_to_try handler

Any other exceptions which are not matched by the predicate are re-raised, and may be caught by an enclosing catch or catchJust.

The handle functions
handle :: (Exception -> IO a) -> IO a -> IO a

A version of catch with the arguments swapped around; useful in situations where the code for the handler is shorter. For example:

   do handle (\e -> exitWith (ExitFailure 1)) $
	  ...
handleJust :: (Exception -> Maybe b) -> (b -> IO a) -> IO a -> IO a
A version of catchJust with the arguments swapped around (see handle).
The try functions
try :: IO a -> IO (Either Exception a)

Similar to catch, but returns an Either result which is (Right a) if no exception was raised, or (Left e) if an exception was raised and its value is e.

  try a = catch (Right \`liftM\` a) (return . Left)

Note: as with catch, it is only polite to use this variant if you intend to re-throw the exception after performing whatever cleanup is needed. Otherwise, tryJust is generally considered to be better.

Also note that System.IO.Error also exports a function called try with a similar type to try, except that it catches only the IO and user families of exceptions (as required by the Haskell 98 IO module).

tryJust :: (Exception -> Maybe b) -> IO a -> IO (Either b a)
A variant of try that takes an exception predicate to select which exceptions are caught (c.f. catchJust). If the exception does not match the predicate, it is re-thrown.
The evaluate function
evaluate :: a -> IO a

Forces its argument to be evaluated, and returns the result in the IO monad. It can be used to order evaluation with respect to other IO operations; its semantics are given by

   evaluate undefined `seq` return ()  ==> return ()
   catch (evaluate undefined) (\e -> return ())  ==> return ()

NOTE: (evaluate a) is not the same as (a `seq` return a).

The mapException function
mapException :: (Exception -> Exception) -> a -> a
This function maps one exception into another as proposed in the paper "A semantics for imprecise exceptions".
Exception predicates
These pre-defined predicates may be used as the first argument to catchJust, tryJust, or handleJust to select certain common classes of exceptions.
ioErrors :: Exception -> Maybe IOError
arithExceptions :: Exception -> Maybe ArithException
errorCalls :: Exception -> Maybe String
dynExceptions :: Exception -> Maybe Dynamic
assertions :: Exception -> Maybe String
asyncExceptions :: Exception -> Maybe AsyncException
userErrors :: Exception -> Maybe String
Dynamic exceptions
Because the Exception datatype is not extensible, there is an interface for throwing and catching exceptions of type Dynamic (see Data.Dynamic) which allows exception values of any type in the Typeable class to be thrown and caught.
throwDyn :: Typeable exception => exception -> b
Raise any value as an exception, provided it is in the Typeable class.
throwDynTo :: Typeable exception => ThreadId -> exception -> IO ()
A variant of throwDyn that throws the dynamic exception to an arbitrary thread (GHC only: c.f. throwTo).
catchDyn :: Typeable exception => IO a -> (exception -> IO a) -> IO a

Catch dynamic exceptions of the required type. All other exceptions are re-thrown, including dynamic exceptions of the wrong type.

When using dynamic exceptions it is advisable to define a new datatype to use for your exception type, to avoid possible clashes with dynamic exceptions used in other libraries.

Asynchronous Exceptions

Asynchronous exceptions are so-called because they arise due to external influences, and can be raised at any point during execution. StackOverflow and HeapOverflow are two examples of system-generated asynchronous exceptions.

The primary source of asynchronous exceptions, however, is throwTo:

  throwTo :: ThreadId -> Exception -> IO ()

throwTo (also throwDynTo and killThread) allows one running thread to raise an arbitrary exception in another thread. The exception is therefore asynchronous with respect to the target thread, which could be doing anything at the time it receives the exception. Great care should be taken with asynchronous exceptions; it is all too easy to introduce race conditions by the over zealous use of throwTo.

Asynchronous exception control
The following two functions allow a thread to control delivery of asynchronous exceptions during a critical region.
block :: IO a -> IO a
Applying block to a computation will execute that computation with asynchronous exceptions blocked. That is, any thread which attempts to raise an exception in the current thread will be blocked until asynchronous exceptions are enabled again. There's no need to worry about re-enabling asynchronous exceptions; that is done automatically on exiting the scope of block.
unblock :: IO a -> IO a
To re-enable asynchronous exceptions inside the scope of block, unblock can be used. It scopes in exactly the same way, so on exit from unblock asynchronous exception delivery will be disabled again.
Applying block to an exception handler

There's an implied block around every exception handler in a call to one of the catch family of functions. This is because that is what you want most of the time - it eliminates a common race condition in starting an exception handler, because there may be no exception handler on the stack to handle another exception if one arrives immediately. If asynchronous exceptions are blocked on entering the handler, though, we have time to install a new exception handler before being interrupted. If this weren't the default, one would have to write something like

      block (
           catch (unblock (...))
                      (\e -> handler)
      )

If you need to unblock asynchronous exceptions again in the exception handler, just use unblock as normal.

Note that try and friends do not have a similar default, because there is no exception handler in this case. If you want to use try in an asynchronous-exception-safe way, you will need to use block.

Interruptible operations

Some operations are interruptible, which means that they can receive asynchronous exceptions even in the scope of a block. Any function which may itself block is defined as interruptible; this includes takeMVar (but not tryTakeMVar), and most operations which perform some I/O with the outside world. The reason for having interruptible operations is so that we can write things like

      block (
         a <- takeMVar m
         catch (unblock (...))
               (\e -> ...)
      )

if the takeMVar was not interruptible, then this particular combination could lead to deadlock, because the thread itself would be blocked in a state where it can't receive any asynchronous exceptions. With takeMVar interruptible, however, we can be safe in the knowledge that the thread can receive exceptions right up until the point when the takeMVar succeeds. Similar arguments apply for other interruptible operations like openFile.

Assertions
assert :: Bool -> a -> a

If the first argument evaluates to True, then the result is the second argument. Otherwise an AssertionFailed exception is raised, containing a String with the source file and line number of the call to assert.

Assertions can normally be turned on or off with a compiler flag (for GHC, assertions are normally on unless optimisation is turned on with -O or the -fignore-asserts option is given). When assertions are turned off, the first argument to assert is ignored, and the second argument is returned as the result.

Utilities
bracket
:: IO acomputation to run first ("acquire resource")
-> (a -> IO b)computation to run last ("release resource")
-> (a -> IO c)computation to run in-between
-> IO c

When you want to acquire a resource, do some work with it, and then release the resource, it is a good idea to use bracket, because bracket will install the necessary exception handler to release the resource in the event that an exception is raised during the computation. If an exception is raised, then bracket will re-raise the exception (after performing the release).

A common example is opening a file:

 bracket
   (openFile "filename" ReadMode)
   (hClose)
   (\handle -> do { ... })

The arguments to bracket are in this order so that we can partially apply it, e.g.:

 withFile name = bracket (openFile name) hClose
bracket_ :: IO a -> IO b -> IO c -> IO c
A variant of bracket where the return value from the first computation is not required.
finally
:: IO acomputation to run first
-> IO bcomputation to run afterward (even if an exception was raised)
-> IO a
A specialised variant of bracket with just a computation to run afterward.
setUncaughtExceptionHandler :: (Exception -> IO ()) -> IO ()
getUncaughtExceptionHandler :: IO (Exception -> IO ())
Produced by Haddock version 0.7