7.11. Rewrite rules

The programmer can specify rewrite rules as part of the source program (in a pragma). GHC applies these rewrite rules wherever it can, provided (a) the -O flag (Section 4.9, “Optimisation (code improvement)”) is on, and (b) the -frules-off flag (Section 4.9.2, “-f*: platform-independent flags”) is not specified, and (c) the -fglasgow-exts (Section 7.1, “Language options”) flag is active.

Here is an example:

  {-# RULES
        "map/map"       forall f g xs. map f (map g xs) = map (f.g) xs
  #-}

7.11.1. Syntax

From a syntactic point of view:

  • There may be zero or more rules in a RULES pragma.

  • Each rule has a name, enclosed in double quotes. The name itself has no significance at all. It is only used when reporting how many times the rule fired.

  • A rule may optionally have a phase-control number (see Section 7.10.3.3, “Phase control”), immediately after the name of the rule. Thus:

      {-# RULES
            "map/map" [2]  forall f g xs. map f (map g xs) = map (f.g) xs
      #-}
    

    The "[2]" means that the rule is active in Phase 2 and subsequent phases. The inverse notation "[~2]" is also accepted, meaning that the rule is active up to, but not including, Phase 2.

  • Layout applies in a RULES pragma. Currently no new indentation level is set, so you must lay out your rules starting in the same column as the enclosing definitions.

  • Each variable mentioned in a rule must either be in scope (e.g. map), or bound by the forall (e.g. f, g, xs). The variables bound by the forall are called the pattern variables. They are separated by spaces, just like in a type forall.

  • A pattern variable may optionally have a type signature. If the type of the pattern variable is polymorphic, it must have a type signature. For example, here is the foldr/build rule:

    "fold/build"  forall k z (g::forall b. (a->b->b) -> b -> b) .
                  foldr k z (build g) = g k z
    

    Since g has a polymorphic type, it must have a type signature.

  • The left hand side of a rule must consist of a top-level variable applied to arbitrary expressions. For example, this is not OK:

    "wrong1"   forall e1 e2.  case True of { True -> e1; False -> e2 } = e1
    "wrong2"   forall f.      f True = True
    

    In "wrong1", the LHS is not an application; in "wrong2", the LHS has a pattern variable in the head.

  • A rule does not need to be in the same module as (any of) the variables it mentions, though of course they need to be in scope.

  • Rules are automatically exported from a module, just as instance declarations are.

7.11.2. Semantics

From a semantic point of view:

  • Rules are only applied if you use the -O flag.

  • Rules are regarded as left-to-right rewrite rules. When GHC finds an expression that is a substitution instance of the LHS of a rule, it replaces the expression by the (appropriately-substituted) RHS. By "a substitution instance" we mean that the LHS can be made equal to the expression by substituting for the pattern variables.

  • The LHS and RHS of a rule are typechecked, and must have the same type.

  • GHC makes absolutely no attempt to verify that the LHS and RHS of a rule have the same meaning. That is undecidable in general, and infeasible in most interesting cases. The responsibility is entirely the programmer's!

  • GHC makes no attempt to make sure that the rules are confluent or terminating. For example:

      "loop"        forall x,y.  f x y = f y x
    

    This rule will cause the compiler to go into an infinite loop.

  • If more than one rule matches a call, GHC will choose one arbitrarily to apply.

  • GHC currently uses a very simple, syntactic, matching algorithm for matching a rule LHS with an expression. It seeks a substitution which makes the LHS and expression syntactically equal modulo alpha conversion. The pattern (rule), but not the expression, is eta-expanded if necessary. (Eta-expanding the expression can lead to laziness bugs.) But not beta conversion (that's called higher-order matching).

    Matching is carried out on GHC's intermediate language, which includes type abstractions and applications. So a rule only matches if the types match too. See Section 7.11.4, “Specialisation ” below.

  • GHC keeps trying to apply the rules as it optimises the program. For example, consider:

      let s = map f
          t = map g
      in
      s (t xs)
    

    The expression s (t xs) does not match the rule "map/map", but GHC will substitute for s and t, giving an expression which does match. If s or t was (a) used more than once, and (b) large or a redex, then it would not be substituted, and the rule would not fire.

  • In the earlier phases of compilation, GHC inlines nothing that appears on the LHS of a rule, because once you have substituted for something you can't match against it (given the simple minded matching). So if you write the rule

            "map/map"       forall f,g.  map f . map g = map (f.g)
    

    this won't match the expression map f (map g xs). It will only match something written with explicit use of ".". Well, not quite. It will match the expression

    wibble f g xs
    

    where wibble is defined:

    wibble f g = map f . map g
    

    because wibble will be inlined (it's small). Later on in compilation, GHC starts inlining even things on the LHS of rules, but still leaves the rules enabled. This inlining policy is controlled by the per-simplification-pass flag -finline-phasen.

  • All rules are implicitly exported from the module, and are therefore in force in any module that imports the module that defined the rule, directly or indirectly. (That is, if A imports B, which imports C, then C's rules are in force when compiling A.) The situation is very similar to that for instance declarations.

7.11.3. List fusion

The RULES mechanism is used to implement fusion (deforestation) of common list functions. If a "good consumer" consumes an intermediate list constructed by a "good producer", the intermediate list should be eliminated entirely.

The following are good producers:

  • List comprehensions

  • Enumerations of Int and Char (e.g. ['a'..'z']).

  • Explicit lists (e.g. [True, False])

  • The cons constructor (e.g 3:4:[])

  • ++

  • map

  • take, filter

  • iterate, repeat

  • zip, zipWith

The following are good consumers:

  • List comprehensions

  • array (on its second argument)

  • length

  • ++ (on its first argument)

  • foldr

  • map

  • take, filter

  • concat

  • unzip, unzip2, unzip3, unzip4

  • zip, zipWith (but on one argument only; if both are good producers, zip will fuse with one but not the other)

  • partition

  • head

  • and, or, any, all

  • sequence_

  • msum

  • sortBy

So, for example, the following should generate no intermediate lists:

array (1,10) [(i,i*i) | i <- map (+ 1) [0..9]]

This list could readily be extended; if there are Prelude functions that you use a lot which are not included, please tell us.

If you want to write your own good consumers or producers, look at the Prelude definitions of the above functions to see how to do so.

7.11.4. Specialisation

Rewrite rules can be used to get the same effect as a feature present in earlier versions of GHC. For example, suppose that:

genericLookup :: Ord a => Table a b   -> a   -> b
intLookup     ::          Table Int b -> Int -> b

where intLookup is an implementation of genericLookup that works very fast for keys of type Int. You might wish to tell GHC to use intLookup instead of genericLookup whenever the latter was called with type Table Int b -> Int -> b. It used to be possible to write

{-# SPECIALIZE genericLookup :: Table Int b -> Int -> b = intLookup #-}

This feature is no longer in GHC, but rewrite rules let you do the same thing:

{-# RULES "genericLookup/Int" genericLookup = intLookup #-}

This slightly odd-looking rule instructs GHC to replace genericLookup by intLookup whenever the types match. What is more, this rule does not need to be in the same file as genericLookup, unlike the SPECIALIZE pragmas which currently do (so that they have an original definition available to specialise).

It is Your Responsibility to make sure that intLookup really behaves as a specialised version of genericLookup!!!

An example in which using RULES for specialisation will Win Big:

toDouble :: Real a => a -> Double
toDouble = fromRational . toRational

{-# RULES "toDouble/Int" toDouble = i2d #-}
i2d (I# i) = D# (int2Double# i) -- uses Glasgow prim-op directly

The i2d function is virtually one machine instruction; the default conversion—via an intermediate Rational—is obscenely expensive by comparison.

7.11.5. Controlling what's going on

  • Use -ddump-rules to see what transformation rules GHC is using.

  • Use -ddump-simpl-stats to see what rules are being fired. If you add -dppr-debug you get a more detailed listing.

  • The definition of (say) build in GHC/Base.lhs looks llike this:

            build   :: forall a. (forall b. (a -> b -> b) -> b -> b) -> [a]
            {-# INLINE build #-}
            build g = g (:) []
    

    Notice the INLINE! That prevents (:) from being inlined when compiling PrelBase, so that an importing module will “see” the (:), and can match it on the LHS of a rule. INLINE prevents any inlining happening in the RHS of the INLINE thing. I regret the delicacy of this.

  • In libraries/base/GHC/Base.lhs look at the rules for map to see how to write rules that will do fusion and yet give an efficient program even if fusion doesn't happen. More rules in GHC/List.lhs.

7.11.6. CORE pragma

The external core format supports “Note” annotations; the CORE pragma gives a way to specify what these should be in your Haskell source code. Syntactically, core annotations are attached to expressions and take a Haskell string literal as an argument. The following function definition shows an example:

f x = ({-# CORE "foo" #-} show) ({-# CORE "bar" #-} x)

Semantically, this is equivalent to:

g x = show x

However, when external for is generated (via -fext-core), there will be Notes attached to the expressions show and x. The core function declaration for f is:

  f :: %forall a . GHCziShow.ZCTShow a ->
                   a -> GHCziBase.ZMZN GHCziBase.Char =
    \ @ a (zddShow::GHCziShow.ZCTShow a) (eta::a) ->
        (%note "foo"
         %case zddShow %of (tpl::GHCziShow.ZCTShow a)
           {GHCziShow.ZCDShow
            (tpl1::GHCziBase.Int ->
                   a ->
                   GHCziBase.ZMZN GHCziBase.Char -> GHCziBase.ZMZN GHCziBase.Cha
r)
            (tpl2::a -> GHCziBase.ZMZN GHCziBase.Char)
            (tpl3::GHCziBase.ZMZN a ->
                   GHCziBase.ZMZN GHCziBase.Char -> GHCziBase.ZMZN GHCziBase.Cha
r) ->
              tpl2})
        (%note "bar"
         eta);

Here, we can see that the function show (which has been expanded out to a case expression over the Show dictionary) has a %note attached to it, as does the expression eta (which used to be called x).