Personal tools

HXT

From HaskellWiki

(Difference between revisions)
Jump to: navigation, search
m
Line 44: Line 44:
 
;[http://hackage.haskell.org/package/hxt-charproperties hxt-charproperties]:[http://hackage.haskell.org/package/hxt-charproperties hxt-charproperties] defines XML- and Unicode character class properties.
 
;[http://hackage.haskell.org/package/hxt-charproperties hxt-charproperties]:[http://hackage.haskell.org/package/hxt-charproperties hxt-charproperties] defines XML- and Unicode character class properties.
 
;[http://hackage.haskell.org/package/hxt-unicode hxt-unicode]:[http://hackage.haskell.org/package/hxt-unicode hxt-unicode] contains decoding function from various encoding schemes to Unicode. The difference of these functions compared to most of those available on hackage are, that these functions are lazy even in the case of encoding errors (thanks to Henning Thielemann).
 
;[http://hackage.haskell.org/package/hxt-unicode hxt-unicode]:[http://hackage.haskell.org/package/hxt-unicode hxt-unicode] contains decoding function from various encoding schemes to Unicode. The difference of these functions compared to most of those available on hackage are, that these functions are lazy even in the case of encoding errors (thanks to Henning Thielemann).
;[http://hackage.haskell.org/package/hxt-regex-xmlschema hxt-regex-xmlschema]:[http://hackage.haskell.org/package/hxt-regex-xmlschema hxt-regex-xmlschema] contains a lightweight and efficient regex-library. There is full Unicode support, the standard syntax defined in the XML-Schema doc is supported, and there are extensions available for intersection, difference, exclusive OR. The package is self contained, no other regex library is required.
+
;[http://hackage.haskell.org/package/hxt-regex-xmlschema hxt-regex-xmlschema]:[http://hackage.haskell.org/package/hxt-regex-xmlschema hxt-regex-xmlschema] contains a lightweight and efficient regex-library. There is full Unicode support, the standard syntax defined in the XML-Schema doc is supported, and there are extensions available for intersection, difference, exclusive OR. The package is self contained, no other regex library is required. The Wiki page [[Regular expressions for XML Schema]] describes the theory behind this
  +
regex library and the extensions and gives some usage examples.
   
 
=== Installation ===
 
=== Installation ===

Revision as of 15:43, 1 October 2010


1 A gentle introduction to the Haskell XML Toolbox

The Haskell XML Toolbox (HXT) is a collection of tools for processing XML with Haskell. The core component of the Haskell XML Toolbox is a domain specific language consisting of a set of combinators for processing XML trees in a simple and elegant way. The combinator library is based on the concept of arrows. The main component is a validating and namespace aware XML-Parser that supports almost fully the XML 1.0 Standard. Extensions are a validator for RelaxNG and an XPath evaluator.

Contents


2 Background

The Haskell XML Toolbox is based on the ideas of HaXml and HXML, but introduces a more general approach for processing XML with Haskell. HXT uses a generic data model for representing XML documents, including the DTD subset, entity references, CData parts and processing instructions. This data model makes it possible to use tree transformation functions as a uniform design of XML processing steps from parsing, DTD processing, entity processing, validation, namespace propagation, content processing and output.

HXT has grown over the years. Components for XPath, XSLT, validation with RelaxNG, picklers for conversion from/to native Haskell data, lazy parsing with tagsoup, input via curl and native Haskell HTTP and others have been added. This has led to a rather large package with a lot of dependencies.

To make the toolbox more modular and to reduce the dependencies on other packages, hxt has been split into various smaller packages since version 9.0.0.

3 Resources

3.1 Home Page and Repositoy

HXT
The project home for HXT
HXT on GitHub
The git source repository on github for all HXT packages

3.2 Packages

All packages are available on hackage.

hxt
The package hxt forms the core of the toolbox. It contains a validating XML parser and a HTML parser, which tries to read any text as HTML, a DSL for processing, transformin and generating XML/HTML, and so called pickler for conversion from/to XML and native Haskell data.
hxt-http
Native HTTP support is contained in hxt-http and depends on package HTTP.
hxt-curl
HTTP support via libCurl and package curl is in hxt-curl.
hxt-tagsoup
The lazy tagsoup parser can be found in package hxt-tagsoup, only this package depends on Neil Mitchell's tagsoup.
hxt-xpath
hxt-xslt
hxt-relaxng
The XPath-, XSLT- and RelaxNG-extensions are separated into hxt-xpath, hxt-xslt and hxt-relaxng.
Basic packages
There are some basic functionalities, which are not only of interest for HXT, but can be useful for other none XML/HTML related projects. These have been separated too.
hxt-charproperties
hxt-charproperties defines XML- and Unicode character class properties.
hxt-unicode
hxt-unicode contains decoding function from various encoding schemes to Unicode. The difference of these functions compared to most of those available on hackage are, that these functions are lazy even in the case of encoding errors (thanks to Henning Thielemann).
hxt-regex-xmlschema
hxt-regex-xmlschema contains a lightweight and efficient regex-library. There is full Unicode support, the standard syntax defined in the XML-Schema doc is supported, and there are extensions available for intersection, difference, exclusive OR. The package is self contained, no other regex library is required. The Wiki page Regular expressions for XML Schema describes the theory behind this

regex library and the extensions and gives some usage examples.

3.3 Installation

When installing hxt with cabal, one does not have to deal with all the basic packages. Just a

cabal install hxt

does the work for the core toolbox. When HTTP access is requred, install at least one of the packages hxt-curl or hxt-http. All other packages can be installed on demand any time later.

3.4 Upgrade from HXT versions < 9.0

HXT-9 is not downwards compatible. The splitting into smaller packages required some internal reorganisation and changes of some type declarations. To use the main features of the core package, add an

import Text.XML.HXT.Core
to your sources, instead of
Text.XML.HXT.Arrow
.

The second major change was the kind of configuration and option handling. This was done previously by lists of key-value-pairs implemented as string. The growing number of options and the untyped option values have led to unreliable code. With HXT-9 options are represented by functions with type save argument types instead of strings. This option handling has to be modified when switching to the new version.

Examples copyXML and Pattern for a main program show the new form of options.

4 The basic concepts

4.1 The basic data structures

Processing of XML is a task of processing tree structures. This is can be done in Haskell in a very elegant way by defining an appropriate tree data type, a Haskell DOM (document object model) structure. The tree structure in HXT is a rose tree with a special XNode data type for storing the XML node information.

The generally useful tree structure (NTree) is separated from the node type (XNode). This allows for reusing the tree structure and the tree traversal and manipulation functions in other applications.

data NTree a  = NTree a [NTree a]     -- rose tree
 
data XNode    = XText String          -- plain text node
              | ...
              | XTag QName XmlTrees   -- element name and list of attributes
              | XAttr QName           -- attribute name
              | ...
 
type QName    = ...                   -- qualified name
 
type XmlTree  = NTree XNode
 
type XmlTrees = [XmlTree]

4.2 The concept of filters

Selecting, transforming and generating trees often requires routines, which compute not only a single result tree, but a (possibly empty) list of (sub-)trees. This leads to the idea of XML filters like in HaXml. Filters are functions, which take an XML tree as input and compute a list of result trees.

type XmlFilter = XmlTree -> [XmlTree]

More generally we can define a filter as

type Filter a b = a -> [b]
We will do this abstraction later, when introducing arrows. Many of the functions in the following motivating examples can be generalised this way. But for getting the idea, the
XmlFilter
is sufficient.

The filter functions are used so frequently, that the idea of defining a domain specific language with filters as the basic processing units comes up. In such a DSL the basic filters are predicates, selectors, constructors and transformers, all working on the HXT DOM tree structure. For a DSL it becomes necessary to define an appropriate set of combinators for building more complex functions from simpler ones. Of course filter composition, like (.), becomes one of the most frequently used combinators. There are more complex filters for traversal of a whole tree and selection or transformation of several nodes. We will see a few first examples in the following part.

The first task is to build filters from pure functions, to define a lift operator. Pure functions are lifted to filters in the following way:

Predicates are lifted by mapping False to the empty list and True to the single element list, containing the input tree.

p   :: XmlTree -> Bool		-- pure function
p t =  ...
 
pf  :: XmlTree -> [XmlTree]	-- or XmlFilter
pf t
  | p t       = [t]
  | otherwise = []
The combinator for this type of lifting is called
isA
, it works on any type and is defined as
isA  :: (a -> Bool) -> (a -> [a])
isA p x
  | p x       = [x]
  | otherwise = []

A predicate for filtering text nodes looks like this

isXText		              :: XmlFilter       -- XmlTree -> [XmlTree]
isXText t@(NTree (XText _) _) =  [t]
isXText _                     =  []

Transformers -- functions that map a tree into another tree -- are lifted in a trivial way:

f	:: XmlTree -> XmlTree
f t	=  exp(t)
 
ff	:: XmlTree -> [XmlTree]
ff t	= [exp(t)]
This basic function is called
arr
, it comes from the Control.Arrow module of the basic library package of ghc.

Partial functions, functions that can't always compute a result, are usually lifted to totally defined filters:

f	:: XmlTree -> XmlTree
f t
  | p t	      =  expr(t)
  | otherwise = error "f not defined"
 
ff	:: XmlFilter
ff t
  | p t       = [expr(t)]
  | otherwise = []

This is a rather comfortable situation, with these filters we don't have to deal with illegal argument errors. Illegal arguments are just mapped to the empty list.

When processing trees, there's often the case, that no, exactly one, or more than one result is possible. These functions, returning a set of results are often a bit imprecisely called nondeterministic functions. These functions, e.g. selecting all children of a node or all grandchildren, are exactly our filters. In this context lists instead of sets of values are the appropriate result type, because the ordering in XML is important and duplicates are possible.

Working with filters is rather similar to working with binary relations, and working with relations is rather natural and comfortable, database people know this very well.

Two first examples for working with nondeterministic functions are selecting the children and the grandchildren of an XmlTree which can be implemented by

getChildren	 :: XmlFilter
getChildren (NTree n cs)
  = cs
 
getGrandChildren :: XmlFilter
getGrandChildren (NTree n cs)
  = concat [ getChildren c | c <- cs ]

4.3 Filter combinators

Composition of filters (like function composition) is the most important combinator. We will use the infix operator
(>>>)
for filter composition and reverse the arguments, so we can read composition sequences from left to right, like with pipes in Unix. Composition is defined as follows:
(>>>)	    :: XmlFilter -> XmlFilter -> XmlFilter
 
(f >>> g) t =  concat [g t' | t' <- f t]
This definition corresponds 1-1 to the composition of binary relations. With help of the
(>>>)
operator the definition of
getGrandChildren
becomes rather simple:
getGrandChildren :: XmlFilter
getGrandChildren = getChildren >>> getChildren
Selecting all text nodes of the children of an element can also be formulated very easily with the help of
(>>>)
getTextChildren :: XmlFilter
getTextChildren = getChildren >>> isXText
When used to combine predicate filters, the
(>>>)
serves as a logical "and" operator or, from the relational view, as an intersection operator:
isA p1 >>> isA p2
selects all values for which p1 and p2 both hold. The dual operator to
(>>>)
is the logical or, (thinking in sets: The union operator). For this we define a sum operator
(<+>)
. The sum of two filters is defined as follows:
(<+>)	    :: XmlFilter -> XmlFilter -> XmlFilter
 
(f <+> g) t =  f t ++ g t
Example:
isA p1 <+> isA p2
is the logical or for filter.

Combining elementary filters with (>>>) and (<+>) leads to more complex functionality. For example, selecting all text nodes within two levels of depth (in left to right order) can be formulated with:

getTextChildren2 :: XmlFilter
getTextChildren2 = getChildren >>> ( isXText <+> ( getChildren >>> isXText ) )

Exercise: Are these filters equivalent or what's the difference between the two filters?

getChildren >>> ( isXText <+> ( getChildren >>> isXText ) )
 
( getChildren >>> isXText ) <+> ( getChildren >>> getChildren >>> isXText )

Of course we need choice combinators. The first idea is an if-then-else filter, built up from three simpler filters. But often it's easier and more elegant to work with simpler binary combinators for choice. So we will introduce the simpler ones first.

One of these choice combinators is called
orElse
and is defined as

follows:

orElse	:: XmlFilter -> XmlFilter -> XmlFilter
orElse f g t
  | null res1 = g t
  | otherwise = res1
  where
  res1 = f t
The meaning is the following: If f computes a non-empty list as result, f succeeds and this list is the result, else g is applied to the input and this yields the result. There are two other simple choice combinators usually written in infix notation,
 g `guards` f
and
f `when` g
:
guards	:: XmlFilter -> XmlFilter -> XmlFilter
guards g f t
  | null (g t) = []
  | otherwise  = f t
 
when	:: XmlFilter -> XmlFilter -> XmlFilter
when f g t
  | null (g t) = [t]
  | otherwise  = f t

These choice operators become useful when transforming and manipulating trees.

4.4 Tree traversal filter

A very basic operation on tree structures is the traversal of all nodes and the selection and/or transformation of nodes. These traversal filters serve as control structures for processing whole trees. They correspond to the map and fold combinators for lists.

The simplest traversal filter does a top down search of all nodes with a special feature. This filter, called
deep
, is defined as follows:
deep	:: XmlFilter -> XmlFilter
deep f  = f `orElse` (getChildren >>> deep f)
When a predicate filter is applied to
deep
, a top down search is done and all subtrees satisfying the predicate are collected. The descent into the tree stops when a subtree is found, because of the use of
orElse
.

Example: Selecting all plain text nodes of a document can be formulated with:

deep isXText

Example: Selecting all "top level" tables in a HTML documents looks like this:

deep (isElem >>> hasName "table")
A variant of
deep
, called
multi
, performs a complete search, where the tree traversal does not stop when a node is found.
multi	:: XmlFilter -> XmlFilter
multi f  = f <+> (getChildren >>> multi f)
Example: Selecting all tables in a HTML document, even nested ones,
multi
has to be used instead of
deep
:
multi (isElem >>> hasName "table")

4.5 Arrows

We've already seen, that the filters
a -> [b]
are a very

powerful and sometimes a more elegant way to process XML than pure function. This is the good news. The bad news is, that filter are not general enough. Of course we sometimes want to do some I/O and we want to stay in the filter level. So we need something like

type XmlIOFilter = XmlTree -> IO [XmlTree]

for working in the IO monad.

Sometimes it's appropriate to thread some state through the computation like in state monads. This leads to a type like

type XmlStateFilter state = state -> XmlTree -> (state, [XmlTree])

And in real world applications we need both extensions at the same time. Of course I/O is necessary but usually there are also some global options and variables for controlling the computations. In HXT, for instance there are variables for controlling trace output, options for setting the default encoding scheme for input data and a base URI for accessing documents, which are addressed in a content or in a DTD part by relative URIs. So we need something like

type XmlIOStateFilter state = state -> XmlTree -> IO (state, [XmlTree])

We want to work with all four filter variants, and in the future perhaps with even more general filters, but of course not with four

sets of filter names, e.g.
deep, deepST, deepIO, deepIOST
. This is the point where
newtype
s and
class
es

come in. Classes are needed for overloading names and

newtype
s are needed to declare instances. Further the restriction of
XmlTree
as argument and result type is

not neccessary and hinders reuse in many cases.

A filter discussed above has all features of an arrow. Arrows are introduced for generalising the concept of functions and function combination to more general kinds of computation than pure functions.

A basic set of combinators for arrows is defined in the classes in the

Control.Arrow
module, containing the above mentioned
(>>>), (<+>), arr
.

In HXT the additional classes for filters working with lists as result type are

defined in
Control.Arrow.ArrowList
. The choice operators are in
Control.Arrow.ArrowIf
, tree filters, like
getChildren, deep, multi, ...
in
Control.Arrow.ArrowTree
and the elementary XML specific filters in
Text.XML.HXT.XmlArrow
.

In HXT there are four types instantiated with these classes for pure list arrows, list arrows with a state, list arrows with IO and list arrows with a state and IO.

newtype LA      a b = LA    { runLA  :: (a -> [b]) }
 
newtype SLA   s a b = SLA   { runSLA :: (s -> a -> (s, [b])) }
 
newtype IOLA    a b = IOLA  { runIOLA :: (a -> IO [b]) }
 
newtype IOSLA s a b = IOSLA { runIOSLA :: (s -> a -> IO (s, [b])) }

The first one and the last one are those used most frequently in the toolbox, and of course there are lifting functions for converting general arrows into more specific arrows.

Don't worry about all these conceptual details. Let's have a look into some Hello world examples.

5 Getting started: Hello world examples

5.1 copyXML

The first complete example is a program for copying an XML document

module Main
where
 
import Text.XML.HXT.Core
import Text.XML.HXT.Curl -- use libcurl for HTTP access
                         -- only necessary when reading http://...
 
import System.Environment
 
main :: IO ()
main
    = do
      [src, dst] <- getArgs
      runX ( readDocument [withValidate no
                          ,withCurl []
                          ] src
	     >>>
	     writeDocument [withIndent yes
                           ,withOutputEncoding isoLatin1
                           ] dst
	   )
      return ()

The interesting part of this example is

the call of
runX
.
runX
executes an

arrow. This arrow is one of the more powerful list arrows with IO and a HXT system state.

The arrow itself is a composition of
readDocument
and
writeDocument
.
readDocument
is an arrow for reading, DTD processing and

validation of documents. Its behaviour can be controlled by a list of

system options. Here we turn off the validation step. The
src
, a file

name or an URI is read and parsed and a document tree is built.

The input option
withCurl []
enables reading via HTTP.

For using this option, the extra package hxt-curl must be installed,

and
withCurl
must be imported by
import Text.XML.HXT.Curl
.

If only file access is necessary, this option and the import can be dropped. In that case the program does not depend on the libCurl binding.

The tree read in is piped into the output arrow. This one again is

controlled by a set of system options. The
withIndent
option

controlls the output formatting, here indentation is switche on,

the
withOutputEncoding

is set to IOS Latin1.

writeDocument
converts the tree into a string and writes it to the
dst
.

We've omitted here the boring stuff of option parsing and error handling.

Compilation and a test run looks like this:

hobel > ghc --make -o copyXml CopyXML.hs
hobel > cat hello.xml
<hello><haskell>world</haskell></hello>
hobel > copyXml hello.xml -
<?xml version="1.0" encoding="ISO-8859-1"?>
<hello>
  <haskell>world</haskell>
</hello>
hobel >

The mini XML document in file hello.xml is read and a document tree is built. Then this tree is converted into a string and written to standard output (filename: -). It is decorated with an XML declaration containing the version and the output encoding.

For processing HTML documents there is a HTML parser, which tries to parse and interpret rather anything as HTML. The HTML parser can be selected by calling

readDocument [withParseHTML yes, ...]

The available read and write options can be found in the hxt

module
Text.XML.HXT.Arrow.XmlState.SystemConfig

5.2 Pattern for a main program

A more realistic pattern for a simple Unix filter like program has the following structure:

module Main
where
 
import Text.XML.HXT.Core
import Text.XML.HXT....   -- further HXT packages
 
import System.IO
import System.Environment
import System.Console.GetOpt
import System.Exit
 
main :: IO ()
main
    = do
      argv <- getArgs
      (al, src, dst) <- cmdlineOpts argv
      [rc]  <- runX (application al src dst)
      if rc >= c_err
	 then exitWith (ExitFailure (0-1))
	 else exitWith ExitSuccess
 
-- | the dummy for the boring stuff of option evaluation,
-- usually done with 'System.Console.GetOpt'
 
cmdlineOpts 	:: [String] -> IO (SysConfigList, String, String)
cmdlineOpts argv
    = return ([withValidate no], argv!!0, argv!!1)
 
-- | the main arrow
 
application	:: SysConfigList -> String -> String -> IOSArrow b Int
application cfg src dst
    = configSysVars cfg                                           -- (0)
      >>>
      readDocument [] src
      >>>
      processChildren (processDocumentRootElement `when` isElem)  -- (1)
      >>>
      writeDocument [] dst                                        -- (3)
      >>>
      getErrStatus
 
 
-- | the dummy for the real processing: the identity filter
 
processDocumentRootElement	:: IOSArrow XmlTree XmlTree
processDocumentRootElement
    = this         -- substitute this by the real application

This program has the same functionality as our first example, but it separates the arrow from the boring option evaluation and return code computation.

In line (0) the system is configured with the list of options. These options are then used as defaults for all read and write operation. The options can be overwritten for single read/write calls by putting config options into the parameter list of the read/write function calls.

The interesing line is (1).

readDocument
generates a tree structure with a so called extra

root node. This root node is a node above the XML document root element. The node above the XML document root element is neccessary because of possible other elements on the same tree level as the XML root, for instance comments, processing instructions or whitespace.

Furthermore the artificial root node serves for storing meta information about the document in the attribute list, like the document name, the encoding scheme, the HTTP transfer headers and other information.

To process the real XML root element, we have to take the children of the root node, select the XML root element and process this, but remain all other children unchanged. This is done with

processChildren
and the
when
choice operator.
processChildren
applies a filter elementwise to

all children of a node. All results form processing the list of children from the result node.

The structure of internal document tree can be made visible

e.g. by adding the option
withShowTree yes
to the
writeDocument
arrow in (3).

This will emit the tree in a readable text representation instead of the real document.

In the next section we will give examples for the

processDocumentRootElement
arrow.

5.3 Tracing

There are tracing facilities to observe the actions performed and to show intermediate results

application	:: SysConfigList -> String -> String -> IOSArrow b Int
application cfg src dst
    = configSysVars (withTrace 1 : cfg)                           -- (0)
      >>>
      traceMsg 1 "start reading document"                         -- (1)
      >>>
      readDocument [] src
      >>>
      traceMsg 1 "document read, start processing"                -- (2)
      >>>
      processChildren (processDocumentRootElement `when` isElem)
      >>>
      traceMsg 1 "document processed"                             -- (3)
      >>>
      writeDocument [] dst

In (0) the system trace level is set to 1, in default level 0 all trace messages are suppressed. The three trace messages (1)-(3) will be issued, but also readDocument and writeDocument will log their activities.

How a whole document and the internal tree structure can be traced, is shown in the following example

      ...
      >>>
      processChildren (processDocumentRootElement `when` isElem)
      >>>
      withTraceLevel 4 (traceDoc "resulting document")      -- (1)
      >>>
      ...

In (1) the trace level is locally set to the highest level 4. traceDoc will then issue the trace message, the document formatted as XML, and the internal DOM tree of the document.

6 Selection examples

6.1 Selecting text from an HTML document

Selecting all the plain text of an XML/HTML document can be formulated with

selectAllText	:: ArrowXml a => a XmlTree XmlTree
selectAllText
    = deep isXText
deep
traverses the whole tree, stops the traversal when a node is a text node (
isXText
) and returns all the text nodes. There are two other traversal operators
deepest
and
multi
,

In this case, where the selected nodes are all leaves, these would give the same result.

6.2 Selecting text and ALT attribute values

Let's take a bit more complex task: We want to select all text, but also the values of the alt attributes of image tags.

selectAllTextAndAltValues	:: ArrowXml a => a XmlTree XmlTree
selectAllTextAndAltValues
    = deep
      ( isXText                      -- (1)
	<+>
	( isElem >>> hasName "img"   -- (2)
	  >>>
	  getAttrValue "alt"         -- (3)
	  >>>
	  mkText                     -- (4)
	)
      )

The whole tree is searched for text nodes (1) and for image elements (2), from the image elements the alt attribute values are selected as plain text (3), this text is transformed into a text node (4).

6.3 Selecting text and ALT attribute values (2)

Let's refine the above filter one step further. The text from the alt attributes shall be marked in the output by surrounding double square brackets. Empty alt values shall be ignored.

selectAllTextAndRealAltValues	:: ArrowXml a => a XmlTree XmlTree
selectAllTextAndRealAltValues
    = deep
      ( isXText
	<+>
	( isElem >>> hasName "img"
	  >>>
	  getAttrValue "alt"
	  >>>
	  isA significant            -- (1)
	  >>>
	  arr addBrackets            -- (2)
	  >>>
	  mkText
	)
      )
    where
    significant :: String -> Bool
    significant = not . all (`elem` " \n\r\t")
 
    addBrackets :: String -> String
    addBrackets s
	=  " [[ " ++ s ++ " ]] "

This example shows two combinators for building arrows from pure functions.

The first one
isA
removes all empty or whitespace values from alt attributes (1), the other
arr
lifts the editing function to the arrow level (2).

7 Document construction examples

7.1 The Hello World document

The first document, of course, is a Hello World document:

helloWorld	:: ArrowXml a => a XmlTree XmlTree
helloWorld
    = mkelem "html" []              -- (1)
      [ mkelem "head" []
	[ mkelem "title" []
	  [ txt "Hello World" ]     -- (2)
	]
      , mkelem "body"
	[ sattr "class" "haskell" ] -- (3)
	[ mkelem "h1" []
	  [ txt "Hello World" ]     -- (4)
	]
      ]
The main arrows for document construction are
mkelem
and it's variants (
selem, aelem, eelem
) for element creation,
attr
and
sattr
for attributes and
mktext
and
txt
for text nodes.
mkelem
takes three arguments, the element name (or tag name), a list of arrows for the construction of attributes, not empty in (3), and a list of arrows for the contents. Text content is generated in (2) and (4).

To write this document to a file use the following arrow

root [] [helloWorld]                         -- (1)
>>>
writeDocument [withIndent yes] "hello.xml"   -- (2)
When this arrow is executed, the
helloWorld

document is wrapped into a so called root node (1). This complete document is written to "hello.xml" (2).

writeDocument
and its variants always expect

a whole document tree with such a root node. Before writing, the document is

indented (
withIndent yes
)) by inserting extra whitespace

text nodes, and an XML declaration with version and encoding is added. If the indent option is not given, the whole document would appears on a single line:

<?xml version="1.0" encoding="UTF-8"?>
<html>
  <head>
    <title>Hello World</title>
  </head>
  <body class="haskell">
    <h1>Hello World</h1>
  </body>
</html>

The code can be shortened a bit by using some of the convenient functions:

helloWorld2	:: ArrowXml a => a XmlTree XmlTree
helloWorld2
    = selem "html"
      [ selem "head"
	[ selem "title"
	  [ txt "Hello World" ]
	]
      , mkelem "body"
	[ sattr "class" "haskell" ]
	[ selem "h1"
	  [ txt "Hello World" ]
	]
      ]

In the above two examples the arrow input is totally ignored, because

of the use of the constant arrow
txt "..."
.

7.2 A page about all images within a HTML page

A bit more interesting task is the construction of a page containing a table of all images within a page inclusive image URLs, geometry and ALT attributes.

The program for this has a frame similar to the
helloWorld
program,

but the rows of the table must be filled in from the input document. In the first step we will generate a table with a single column containing the URL of the image.

imageTable	:: ArrowXml a => a XmlTree XmlTree
imageTable
    = selem "html"
      [ selem "head"
	[ selem "title"
	  [ txt "Images in Page" ]
	]
      , selem "body"
	[ selem "h1"
	  [ txt "Images in Page" ]
	, selem "table"
	  [ collectImages           -- (1)
	    >>>
	    genTableRows            -- (2)
	  ]
	]
      ]
    where
    collectImages                   -- (1)
	= deep ( isElem
                 >>>
                 hasName "img"
               )
    genTableRows                    -- (2)
	= selem "tr"
	  [ selem "td"
	    [ getAttrValue "src" >>> mkText ]
	  ]

With (1) the image elements are collected, and with (2) the HTML code for an image element is built.

Applied to http://www.haskell.org/ we get the following result (at the time writing this page):

<html>
  <head>
    <title>Images in Page</title>
  </head>
  <body>
    <h1>Images in Page</h1>
    <table>
      <tr>
        <td>/haskellwiki_logo.png</td>
      </tr>
      <tr>
        <td>/sitewiki/images/1/10/Haskelllogo-small.jpg</td>
      </tr>
      <tr>
        <td>/haskellwiki_logo_small.png</td>
      </tr>
    </table>
  </body>
</html>

When generating HTML, often there are constant parts within the page, in the example e.g. the page header. It's possible to write these parts as a string containing plain HTML and then read this with

a simple XML contents parser called
xread
.

The example above could then be rewritten as

imageTable
    = selem "html"
      [ pageHeader
      , ...
      ]
    where
    pageHeader
	= constA "<head><title>Images in Page</title></head>"
	  >>>
	  xread
    ...
xread
is a very primitive arrow. It does not run in the

IO monad, so it can be used in any context, but therefore the error handling

is very limited.
xread
parses an XML element content.

7.3 A page about all images within a HTML page: 1. Refinement

The next refinement step is the extension of the table such that it contains four columns, one for the image itself, one for the URL,

the geometry and the ALT text. The extended
getTableRows

has the following form:

    genTableRows
	= selem "tr"
	  [ selem "td"			-- (1)
	    [ this                      -- (1.1)
	    ]
	  , selem "td"                  -- (2)
	    [ getAttrValue "src"
	      >>>
	      mkText
	      >>>
	      mkelem "a"                -- (2.1)
	      [ attr "href" this ]
	      [ this ]
	    ]
	  , selem "td"                  -- (3)
	    [ ( getAttrValue "width"
		&&&                     -- (3.1)
		getAttrValue "height"
	      )
	      >>>
	      arr2 geometry             -- (3.2)
	      >>>
	      mkText
	    ]
	  , selem "td"                  -- (4)
	    [ getAttrValue "alt"
	      >>>
	      mkText
	    ]
	  ]
        where
	geometry :: String -> String -> String
	geometry "" ""
	    = ""
	geometry w h
	    = w ++ "x" ++ h
In (1) the identity arrow
this
is used for inserting the whole image element (
this
value) into the first column.

(2) is the column from the previous example but the URL has been made active by embedding the URL in an A-element (2.1). In (3) there are two

new combinators,
(&&&)
(3.1) is an arrow for applying two arrows to the same input and combine the results into a pair.
arr2
works like
arr
but it lifts a binary function into an arrow accepting a pair of values.
arr2 f
is a shortcut for
arr (uncurry f)
. So width and height are combined into an X11 like

geometry spec. (4) adds the ALT-text.

7.4 A page about all images within a HTML page: 2. Refinement

The generated HTML page is not yet very useful, because it usually contains relative HREFs to the images, so the links do not work. We have to transform the SRC attribute values into absolute URLs. This can be done with the following code:

imageTable2	:: IOStateArrow s XmlTree XmlTree
imageTable2
    = ...
      ...
	, selem "table"
	  [ collectImages
	    >>>
	    mkAbsImageRef                          -- (1)
	    >>>
	    genTableRows
	  ]
       ...
 
mkAbsImageRef :: IOStateArrow s XmlTree XmlTree    -- (1)
mkAbsImageRef
    = processAttrl ( mkAbsRef                      -- (2)
                     `when`
                     hasName "src"                 -- (3)
                   )
      where
      mkAbsRef                                     -- (4)
	  = replaceChildren
	    ( xshow getChildren                    -- (5)
	      >>>
	      ( mkAbsURI `orElse` this )           -- (6)
	      >>>
	      mkText                               -- (7)
	    )
The
imageTable2
is extended by an arrow
mkAbsImageRef

(1). This arrow uses the global system state of HXT, in which the base URL of a document is stored. For editing the SRC attribute value, the attribute list

of the image elements is processed with
processAttrl
. With the
`when` hasName "src"
only SRC attributes are manipulated (3). The real work is done in (4): The URL is selected with
getChildren
, a text node, and converted into a string (
xshow
), the URL is transformed into an absolute URL with
mkAbsURI
(6). This arrow may fail, e.g. in case of illegal URLs. In this case the URL remains unchanged (
`orElse` this
).

The resulting String value is converted into a text node forming the new attribute value node (7).

Because of the use of the global HXT state in
mkAbsURI
mkAbsRef
and
imageTable2
need to have the more specialized signature
IOStateArrow s XmlTree XmlTree
.

8 Transformation examples

8.1 Decorating external references of an HTML document

In the following examples, we want to decorate the external references in an HTML page by a small icon, like it's done in many wikis. For this task the document tree has to be traversed, all parts except the intersting A-Elements remain unchanged. At the end of the list of children of an A-Element we add an image element.

Here is the first version:

addRefIcon	:: ArrowXml a => a XmlTree XmlTree
addRefIcon
    = processTopDown                       -- (1)
      ( addImg                             -- (2)
	`when`
	isExternalRef                      -- (3)
      )
    where
    isExternalRef                          -- (4)
	= isElem
	  >>>
	  hasName "a"
          >>>
	  hasAttr "href"
	  >>>
	  getAttrValue "href"
	  >>>
	  isA isExtRef
	where
	isExtRef                           -- (4.1)
	    = isPrefixOf "http:"           -- or something more precise
 
    addImg
	= replaceChildren                  -- (5)
	  ( getChildren                    -- (6)
	    <+>
	    imgElement                     -- (7)
	  )
 
    imgElement
	= mkelem "img"                     -- (8)
	  [ sattr "src" "/icons/ref.png"   -- (9)
	  , sattr "alt" "external ref"
	  ] []                             -- (10)
The traversal is done with
processTopDown
(1).

This arrow applies an arrow to all nodes of the whole document tree.

The transformation arrow applies the
addImg
(2) to

all A-elements (3),(4). This arrow uses a bit simplified test (4.1) for external URLs.

addImg
manipulates all children (5) of the A-elements by

selecting the current children (6) and adding an image element (7).

The image element is constructed with
mkelem
(8). This takes

an element name, a list of arrows for computing the attributes and a list of arrows for computing the contents. The content of the image element is

empty (10). The attributes are constructed with
sattr
(9).
sattr
ignores the arrow input and builds an attribute form

the name value pair of arguments.

8.2 Transform external references into absolute references

In the following example we will develop a program for editing a HTML page such that all references to external documents (images, hypertext refs, style refs, ...) become absolute references. We will see some new, but very useful combinators in the solution.

The task seems to be rather trivial. In a tree travaersal all references are edited with respect to the document base. But in HTML there is a BASE element, allowed in the content of HEAD with a HREF attribute, which defines the document base. Again this href can be a relative URL.

We start the development with the editing arrow. This gets the real document base as argument.

mkAbsHRefs	:: ArrowXml a => String -> a XmlTree XmlTree
mkAbsHRefs base
    = processTopDown editHRef                   -- (1)
    where
    editHRef
	= processAttrl                          -- (3)
            ( changeAttrValue (absHRef base)    -- (5)
	      `when`
	      hasName "href"                    -- (4)
	     )
	  `when`
	  ( isElem >>> hasName "a" )            -- (2)
	where
 
	absHRef	:: String -> String -> String   -- (5)
	absHRef base url
	    = fromMaybe url . expandURIString url $ base

The tree is traversed (1) and for every A element the attribute list is processed (2). All HREF attribute values (4) are manipulated

by
changeAttrValue
called with a string function (5).
expandURIString
is a pure function defined in HXT for computing

an absolut URI. In this first step we only edit A-HREF attribute values. We will refine this later.

The second step is the complete computation of the base URL.

computeBaseRef	:: IOStateArrow s XmlTree String
computeBaseRef
    = ( ( ( isElem >>> hasName "html"      -- (0)
            >>>
            getChildren                    -- (1)
	    >>>
	    isElem >>> hasName "head"      -- (2)
	    >>>
	    getChildren                    -- (3)
	    >>>
	    isElem >>> hasName "base"      -- (4)
	    >>>
	    getAttrValue "href"            -- (5)
	  )
	  &&&
	  getBaseURI                       -- (6)
	)
	>>> expandURI                      -- (7)
      )
      `orElse` getBaseURI                  -- (8)

Input to this arrow is the HTML element, (0) to (5) is the arrow for selecting the BASE elements HREF value, parallel to this the system base URL is read

with
getBaseURI
(6) like in examples above. The resulting pair of strings is piped into
expandURI
(7), the arrow version of
expandURIString
. This arrow ((1) to (7)) fails in the absense

of a BASE element. in this case we take the plain document base (8). The selection of the BASE elements is not yet very handy. We will define a more general and elegant function later, allowing an element path as selection argument.

In the third step, we will combine the to arrows. For this we will use

a new combinator
($<)
. The need for this new combinator

is the following: We need the arrow input (the document) two times, once for computing the document base, and second for editing the whole document, and we want to compute the extra string parameter for editing of course with the above defined arrow.

The combined arrow, our main arrow, looks like this

toAbsRefs	:: IOStateArrow s XmlTree XmlTree
toAbsRefs
    = mkAbsHRefs $< computeBaseRef        -- (1)
In (1) first the arrow input is piped into
computeBaseRef
, this result is used in
mkAbsHRefs
as extra string parameter when processing the document. Internally the
($<)
combinator is defined by the basic combinators
(&&&), (>>>)
and
app
, but in a bit more complex computations,

this pattern occurs rather frequently, so ($<) becomes very useful.

Programming with arrows is one style of point free programming. Point free programming often becomes unhandy when values are used more than once.

One solution is the special arrow syntax supported by ghc and others, similar to the do notation for monads. But for many simple cases the
($<)
combinator and it's variants
($<<), ($<<<), ($<<<<), ($<$)

is sufficient.

To complete the development of the example, a last step is neccessary: The removal of the redundant BASE element.

toAbsRefs	:: IOStateArrow s XmlTree XmlTree
toAbsRefs
    = ( mkAbsHRefs $< computeBaseRef )
      >>>
      removeBaseElement
 
removeBaseElement	:: ArrowXml a => a XmlTree XmlTree
removeBaseElement
    = processChildren
        ( processChildren
            ( none                            -- (1)
              `when`
              ( isElem >>> hasName "base" )
            )
          `when`
          ( isElem >>> hasName "head" )
        )

In this function the children of the HEAD element are searched for

a BASE element. This is removed by aplying the null arrow
none

to the input, returning always the empty list.

none `when` ...
is the pattern for deleting nodes from a tree. The
computeBaseRef
function defined above contains an arrow pattern

for selecting the right subtree that is rather common in HXT applications

isElem >>> hasName n1
>>>
getChildren
>>>
isElem >>> hasName n2
...
>>>
getChildren
>>>
isElem >>> hasName nm

For this pattern we will define a convenient function creating the arrow for selection

getDescendents :: ArrowXml a => [String] -> a XmlTree XmlTree
getDescendents
    = foldl1 (\ x y -> x >>> getChildren >>> y)   -- (1)
      .
      map (\ n -> isElem >>> hasName n)           -- (2)

The name list is mapped to the element checking arrow (2),

the resulting list of arrows is folded with
getChildren
into a single arrow.
computeBaseRef
can then be simplified

and becomes more readable:

computeBaseRef	:: IOStateArrow s XmlTree String
computeBaseRef
    = ( ( ( getDescendents ["html","head","base"]  -- (1)
	    >>>
	    getAttrValue "href"                    -- (2)
	  )
      ...
      ...

An even more general and flexible technic are the XPath expressions available for selection of document parts defined in the module

Text.XML.HXT.Arrow.XmlNodeSet
. With XPath
computeBaseRef
can be simplified to
computeBaseRef
    = ( ( ( getXPathTrees "/html/head/base"        -- (1)
            >>>
	    getAttrValue "href"                    -- (2)
	  )
      ...

Even the attribute selection can be expressed by XPath, so (1) and (2) can be combined into

computeBaseRef
    = ( ( xshow (getXPathTrees "/html/head/base@href")
      ...
The extra
xshow
is here required to convert the

XPath result, an XmlTree, into a string.

XPath defines a full language for selecting parts of an XML document. Sometimes it's rather comfortable to make selections of this type, but the XPath evaluation in general is more expensive in time and space than a simple combination of arrows, like we've

seen it in
getDescendends
.

8.3 Transform external references into absolute references: Refinement

In the above example only A-HREF URLs are edited. Now we extend this to other element-attribute combinations.

mkAbsRefs	:: ArrowXml a => String -> a XmlTree XmlTree
mkAbsRefs base
    = processTopDown ( editRef "a" "href"                 -- (2)
		       >>>
		       editRef "img" "src"                -- (3)
		       >>>
		       editRef "link" "href"              -- (4)
		       >>>
		       editRef "script" "src"             -- (5)
		     )
    where
    editRef en an                                         -- (1)
	= processAttrl ( changeAttrValue (absHRef base)
			 `when`
			 hasName an
		       )
	  `when`
	  ( isElem >>> hasName en )
	where
	absHRef	:: String -> String -> String
	absHRef base url
	    = fromMaybe url . expandURIString url $ base
editRef
is parameterized by the element and attribute names.

The arrow applied to every element is extended to a sequence of

editRef
's ((2)-(5)). Notice that the document is still traversed only once.

To process all possible HTML elements, this sequence should be extended by further element-attribute pairs.

This can further be simplified into

mkAbsRefs	:: ArrowXml a => String -> a XmlTree XmlTree
mkAbsRefs base
    = processTopDown editRefs
    where
    editRefs
	= foldl (>>>) this
	  .
	  map (\ (en, an) -> editRef en an)
	  $
	  [ ("a", "href")
	  , ("img", "src")
	  , ("link", "href")
	  , ("script", "src")	    -- and more
	  ]
    editRef
      = ...
The
foldl (>>>) this
is defined in HXT as
seqA
,

so the above code can be simplified to

mkAbsRefs	:: ArrowXml a => String -> a XmlTree XmlTree
mkAbsRefs base
    = processTopDown editRefs
    where
    editRefs
	= seqA . map (uncurry editRef)
	  $
	  ...

9 More complex examples

9.1 Serialization and deserialisation to/from XML

Examples can be found in HXT/Conversion of Haskell data from/to XML

9.2 Practical examples of HXT

More complex and complete examples of HXT in action can be found in HXT/Practical