[Haskell-cafe] Trying to compile Glade Gtk2Hs demo / cabal install
glade problem
Peter Schmitz
ps.haskell at gmail.com
Thu Aug 12 22:47:19 EDT 2010
(I am posting this to Cafe and Gtk2Hs Users; if you subscribe to both,
please reply to Cafe; but I will see your replies either place; thanks
much.)
I am trying to compile the Gtk2Hs demo program GladeTest.hs (located
in the ...\demo\glade dir), under MS Windows XP.
The error I get is:
H:\proc\tools\Gtk2Hs\demo\glade>ghc --make GladeTest.hs
GladeTest.hs:4:7:
Could not find module `Graphics.UI.Gtk.Glade':
(--Note:-- I am using H: instead of C: for reasons described later.)
I did these okay:
cabal install cabal-install
cabal update
cabal install gtk2hs-buildtools
cabal install gtk
and I can compile and run some other Gtk2Hs demos (that do not use Glade) okay.
In general, I am assuming that I need to "cabal install foo" when
Haskell module foo cannot be found during compile. (Please correct me
if I am wrong.)
I get an error during the glade install:
H:\proc\dev\cmd>cabal install glade
...
Configuring glade-0.11.1...
setup.exe: The pkg-config package libglade-2.0 version >=2.0.0 is
required but it could not be found.
...
(the full output is listed below)
I think I have package libglade-2.0 installed, because I installed the
GTK+ and Glade bundle from:
http://ftp.gnome.org/pub/GNOME/binaries/win32/glade3/3.6/glade3-3.6.7-with-GTK+.exe
at: http://ftp.gnome.org/pub/GNOME/binaries/win32/glade3/3.6/
at: http://glade.gnome.org/
That install created tree:
H:\proc\tools\Gtk+\
which includes these:
H:\proc\tools\Gtk+\include\libglade-2.0\
and
H:\proc\tools\Gtk+\glade-3.exe
H:\proc\tools\Gtk+\bin\libglade-2.0-0.dll
H:\proc\tools\Gtk+\lib\libglade-2.0.a
H:\proc\tools\Gtk+\lib\pkgconfig\libglade-2.0.pc
So, I'm thinking maybe my install of Gtk+ (just running
glade3-3.6.7-with-GTK+.exe) was lacking somehow, or cabal somehow
doesn't see my Gtk+ dir (during "cabal install glade") ?
So, I tried editing my cabal config so it would see my Gtk+ tree.
I uncommented and edited these lines in the main, un-indented section:
extra-include-dirs: H:\proc\tools\Gtk+\include
extra-lib-dirs: H:\proc\tools\Gtk+\lib
but it doesn't seem to help.
(my full cabal config listing is below)
Regarding my use of H: instead of C:, I have a non-standard
configuration of the Haskell Platform and cabal.
I need to develop (Haskell code that uses Gtk2Hs, Glade, etc.) in a MS
Windows network, from any of several PCs (one at a time), each of
which uses a common tools tree.
So, instead of installing the Haskell Platform, cabal, Gtk+, etc. to
C:, I have installed them to a network drive (H:).
So, I have:
H:\proc\tools\Haskell Platform
H:\proc\tools\Gtk+
H:\proc\tools\cabal
etc.
Any help or pointers would be appreciated.
Thanks very much,
-- Peter
--- Following is various config and output info ---
My PATH is:
++++++++++++++
SET P_TOOLS=H:\proc\tools
SET HASK_PLAT=%P_TOOLS%\Haskell Platform\2010.1.0.0
PATH
%HASK_PLAT%\bin;
%P_TOOLS%\cabal\bin;
%P_TOOLS%\gtk\bin;
%HASK_PLAT%\lib\extralibs\bin;
%HASK_PLAT%\mingw\bin
++++++++++++++
Some of my environment vars are:
==============
REM This is so Cabal will get its config from the Haskell Platform,
REM rather than C:\Documents and Settings\pschmitz\Application Data\cabal
SET CABAL_CONFIG=%P_TOOLS%\cabal\config
CABAL_CONFIG=H:\proc\tools\cabal\config
PKG_CONFIG_PATH=H:\proc\tools\Gtk+\lib\pkgconfig
GTK_HOME=\\fbpxfile01\users$\pschmitz\proc\tools\Gtk+
HASK_PLAT=H:\proc\tools\Haskell Platform\2010.1.0.0
INCLUDE=\\fbpxfile01\users$\pschmitz\proc\tools\Gtk+\include
LIB=\\fbpxfile01\users$\pschmitz\proc\tools\Gtk+\lib
Path=H:\proc\tools\Haskell
Platform\2010.1.0.0\bin;H:\proc\tools\cabal\bin;H:\proc\tools\Gtk+\bin;
H:\proc\tools\Haskell
Platform\2010.1.0.0\lib\extralibs\bin;H:\proc\tools\Haskell
Platform\2010.1. 0.0\mingw\bin;
==============
The full output from "cabal install glade" is:
-----------------------------
H:\proc\dev\cmd>cabal --version
cabal-install version 0.8.2
using version 1.8.0.2 of the Cabal library
H:\proc\dev\cmd>cabal list glade
* glade
Synopsis: Binding to the glade library.
Latest version available: 0.11.1
Latest version installed: [ Not installed ]
Homepage: http://www.haskell.org/gtk2hs/
License: LGPL-2.1
...
H:\proc\dev\cmd>cabal info glade
* glade (library)
Synopsis: Binding to the glade library.
Latest version available: 0.11.1
Latest version installed: [ Not installed ]
Homepage: http://www.haskell.org/gtk2hs/
Bug reports: http://hackage.haskell.org/trac/gtk2hs/
Description: This library allows to load externally stored user interfaces
into programs. This allows alteration of the interface
without recompilation of the program.
Category: Graphics
License: LGPL-2.1
Author: Manuel M T Chakravarty
Maintainer: gtk2hs-users at sourceforge.net
Source repo: http://code.haskell.org/glade/
Dependencies: base >=4 && <5, array -any, containers -any, haskell98 -any,
mtl -any, glib >=0.11 && <0.12, pango >=0.11 && <0.12,
cairo >=0.11 && <0.12, gtk >=0.11 && <0.12
Cached: Yes
Modules:
Graphics.UI.Gtk.Glade
H:\proc\dev\cmd>cabal install glade
Resolving dependencies...
C:\DOCUME~1\pschmitz\LOCALS~1\Temp\glade-0.11.13100\glade-0.11.1\Gtk2HsSetup.hs:25:
warning: #warning Setup.hs is guessing the version of Cabal.
If compilation of Setup.hs fails use -DCABAL_VERSION_MINOR=x for Cabal
version 1.x.0 when building
(prefixed by --ghc-option= when using the 'cabal' command)
[1 of 2] Compiling Gtk2HsSetup
( C:\DOCUME~1\pschmitz\LOCALS~1\Temp\glade-0.11.13100\glade-0.11.1\Gtk2HsSetup.hs,
C:\DOCUME~1\pschmitz\LOCALS~1\Temp\glade-0.11.13100\glade-0.11.1\dist\setup\Gtk2HsSetup.o
)
[2 of 2] Compiling Main
( C:\DOCUME~1\pschmitz\LOCALS~1\Temp\glade-0.11.13100\glade-0.11.1\Setup.hs,
C:\DOCUME~1\pschmitz\LOCALS~1\Temp\glade-0.11.13100\glade-0.11.1\dist\setup\Main.o
)
Linking C:\DOCUME~1\pschmitz\LOCALS~1\Temp\glade-0.11.13100\glade-0.11.1\dist\setup\setup.exe
...
Configuring glade-0.11.1...
setup.exe: The pkg-config package libglade-2.0 version >=2.0.0 is
required but it could not be found.
cabal: Error: some packages failed to install:
glade-0.11.1 failed during the configure step. The exception was:
ExitFailure 1
-----------------------------
My complete Cabal config follows.
The email may alter the indentation, but I was careful to maintain the
original indentation when editing.
-- ----------------------------------------------------------------------------------------------
-- This is the configuration file for the 'cabal' command line tool.
-- The available configuration options are listed below.
-- Some of them have default values listed.
-- Lines (like this one) beginning with '--' are comments.
-- Be careful with spaces and indentation because they are
-- used to indicate layout for nested sections.
remote-repo: hackage.haskell.org:http://hackage.haskell.org/packages/archive
remote-repo-cache: H:\proc\tools\cabal\packages
-- local-repo:
-- verbose: 1
-- compiler: ghc
-- with-compiler:
-- with-hc-pkg:
-- scratchdir:
-- program-prefix:
-- program-suffix:
-- library-vanilla: True
-- library-profiling: False
-- shared: False
-- executable-profiling: False
-- optimization: True
-- library-for-ghci: True
-- split-objs: False
-- executable-stripping: True
-- user-install: True
-- package-db:
-- flags:
--
-- --------------------------------
-- extra-include-dirs:
-- extra-lib-dirs:
extra-include-dirs: H:\proc\tools\Gtk+\include
extra-lib-dirs: H:\proc\tools\Gtk+\lib
-- --------------------------------
--
-- constraint:
-- cabal-lib-version:
-- preference:
-- documentation: False
-- doc-index-file: $datadir\doc\index.html
-- root-cmd:
-- symlink-bindir:
build-summary: H:\proc\tools\cabal\logs\build.log
-- build-log:
remote-build-reporting: anonymous
-- username:
-- password:
install-dirs user
prefix: "H:\\proc\\tools\\cabal"
-- bindir: $prefix\bin
-- libdir: $prefix
-- libsubdir: $pkgid\$compiler
-- libexecdir: $prefix\$pkgid
datadir: "H:\\proc\\tools\\Haskell Platform\\2010.1.0.0"
-- datasubdir: $pkgid
-- docdir: $prefix\doc\$pkgid
-- htmldir: $docdir\html
-- haddockdir: $htmldir
install-dirs global
prefix: "H:\\proc\\tools\\Haskell Platform\\2010.1.0.0"
-- bindir: $prefix\bin
-- libdir: $prefix
-- libsubdir: $pkgid\$compiler
-- libexecdir: $prefix\$pkgid
datadir: "H:\\proc\\tools\\Haskell Platform\\2010.1.0.0"
-- datasubdir: $pkgid
-- docdir: $prefix\doc\$pkgid
-- htmldir: $docdir\html
-- haddockdir: $htmldir
-- ----------------------------------------------------------------------------------------------
-- end of post: Trying to compile Glade Gtk2Hs demo / cabal install
glade problem --
More information about the Haskell-Cafe
mailing list